by admin

Tecumseh 10 Hp Engine Lh358sa Manual

10 HP TECUMSEH ENGINE New, Tecumseh horizontal engine built for driving electric generators. Cast iron sleeve, fixed speed governor. Low oil shutdown. Lighted on/off switch. Not for sale or use in California. SPECIFICATIONS. Model LH358XA-159493Y.

Power 10 HP. Speed 3600 RPM. Start Recoil. Shaft Horizontal. Fuel Tank No. Shaft 1-3/8' dia.

Tecumseh 10 Hp Engine Lh358sa Manual

X 1-1/8', stepped to 7/8' dia. X 1-7/8' then tapered from 0.875' to 0.670' by 1.25' length taper. OA length 4.33' tapped 5/16-24 no keyway.

Tecumseh 10 Hp Engine Lh358sa Manual Transmission

Mount 3-1/4' x 6-3/8'. Accessory Mount 4 bolt on 3-5/8' B.C. Size 12' x 13-1/2' x 13'. Shpg. I purchased this 10 hp engine for a coleman powermate generator, when I opened the box I noticed the difference in the length of the crankshafts. My motor has a 2-3/4' tapered shaft and the new motor is 4-3/8'.

8 Hp Tecumseh Engine Manual

Do you have any motors with the shorter shafts and if so can I exchange the motor for the correct one? A: No, we have no other motors like this with the tapered shaft for generator use. If you are unable to use the engine please contact our Customer Service department for return availability and instructions if applicable. I have an older model Bolens ST1032 snow thrower with a really beat up 10 HP Tecumseh. Can I use this motor to replace my snow thrower's motor directly? I think the machine is mid-80s. I am concerned about the bolt pattern for mounting and the shaft dimensions.

Tecumseh 10 hp engine lh358sa manuale

Home > Tecumseh / Lawn Garden Engine parts > Tecumseh lawn garden engine parts > #LH358SA Tecumseh engine. Model #LH358SA Tecumseh engine. Owner's Manual; Owner's Manual; Parts Diagrams (0) No parts found. Click to Chat We're available to chat. Sears PartsDirect uses your location to provide local availability in your area. I purchased this 10 hp engine for a coleman powermate generator, when I opened the box I noticed the difference in the length of the crankshafts. My motor has a 2-3/4' tapered shaft and the new motor is 4-3/8'.

I have not taken apart my machine yet, so I'm not sure if the shaft is tapered like this or not. Did Tecumseh make multiple variants of the 10HP motor, or are they basically all the same? A: There were many variations of the 10 HP engines that Tecumseh made. The tapered shaft was used almost exclusively for generator applications.